Table des Matières
Publicité
Getting started
2
After fully charging, unplug the USB cable from the battery pack, and then
disconnect it from the electric socket.
• To save energy, unplug the charger when not in use. The charger does
not have a power switch, so you must unplug the charger from the
electric socket when not in use to avoid wasting power. The charger
should remain close to the electric socket and easily accessible while
charging.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible.
Checking the remaining battery power
Check the remaining battery power by pressing the Battery Level
button. The indicator lights alerts you to the remaining battery
power.
Remaining
battery power
75–100%
50–75%
25–50%
5–25%
0–5%
Indicator light status
Four indicator lights on
Three indicator lights on
Two indicator lights on
One indicator light on
One indicator light blinking
English (UK)
5
6
4
Publicité
Table des Matières
