Maximum/Minimum Values; Display Values; Reset Values - Renkforce 1380336 Mode D'emploi

14. Maximum/Minimum values

a) Display values
Briefly press the button "MIN/MAX/-" (15) repeatedly to switch between the following
displays:
• Maximum values (display "MAX" in the left of the display)
• Minimum values (display "MIN" in the left of the display)
• Current measured values
If no button is pushed for several seconds, the current measured values will
appear automatically.
b) Reset values
The maximum/minimum values can be reset separately per outdoor sensor.
• Push the respective button "CHANNEL/+" (17) briefly repeatedly until the arrow sym-
bol (5) appears for the respective outdoor sensor (or the indoor sensor "IN").
• Briefly push the button "MIN/MAX/-" (15) to show the maximum values ("MAX").
• If you want to reset the maximum values, keep the button "MIN/MAX/-" (15) pushed
for 3 seconds.
• Briefly push the button "MIN/MAX/-" (15) to show the minimum values ("MIN").
• If you want to reset the minimum values, keep the button "MIN/MAX/-" (15) pushed
for 3 seconds.
• Briefly push the button "MIN/MAX/-" (15) to show the currently measured values
again (or wait for a few seconds).
41