Eddy TBE2 Manuel D'instructions Et D'entretien page 14

Choose the chisel for the job to execute. There are 3 sizes of chisels; 1", 2" and 3".
Most tiles can be removed using chisel sizes 1" and 2". The 3"chisel is mostly used to remove mortar.
NOTE:
See Fig. 8.
Insert the chisel as shown in the following Fig. 12 to 14.

Tilt the tool backwards.

Insert chisel while holding back the chuck.

Turn the chisel until the chisel groove is engaged before releasing the chuck..

Release the chuck.
 If necessary, grease the chisel with the grease that comes with the tool so that the chisel can
be inserted more easily
 Insert chisel while pushing back the chuck (this is the black part of the hammer)
 Put the chisel in the hamer until the chisel groove is engaged
 Release the chuck.
 If necessary, grease the chisel with the grease that comes with the tool so that the chisel
can be inserted more easily
Principle of how to install a chisel in the Tile Breaker:
Page | 14