Eddy TBE2 Manuel D'instructions Et D'entretien page 13

Chisel selection
WARNING: Always disconnect the power cord before proceeding to the chisel installation or removal.
The Eddy Tile breaker comes with a complete set of 3 sizes of chisels. You have the option between 1 inch, 2
inch and 3 inch chisels. They are conveniently located at the back of the tool.
WARNING: only use the 1", 2" or 3" Eddy chisels. These chisels are 8" long and longer chisels are not suitable
and will damage the tool.
To prevent potential injuries, a cover is placed over the chisels. To reach or store chisels, lift the cover. When
finished, lower the cover back to its original position
Picture showing the chisel cover
Page | 13