Eneo VKC-1416A/IR Mode D'emploi page 38

DISPLAY/
DISP0
ALARM
DISP
DISP
DISP
ALARM MODE
DWELL TIME
CAM SET ID
BPS
BRIGHTNESS
SHARPNESS
DISTANCE
MAX. LOWSHUT
PROTOCOL
SAVE PROTOCOL & BPS Save protocol and BPS
EFFECT
D-ZOOM
NEGA/POSI
B/W
Displays camera text and camera ID
Displays camera text, camera ID and zoom lens position
Displays camera text, camera ID, zoom lens position, AGC, shutter speed, aperture,
focus mode, white gain and auto exposure
Display OFF/ON/PUSHON (when button is pressed the display appears for 4-6 sec.)
Off, Preset -5, B/W (Zoom preset and B/W setup by external-in)
0, 0, ... 0sec. (Dwell time setup of zoom preset)
Input of camera ID number. This is displayed upon OSD activation. ( ~ 55)
Baud rate of the serial interface (400/4800/9600/900 bps)
User can adjust brightness level (0 ~ 90), level 30 is default setting.
User can adjust sharpness level (0 ~ 5), level 8 is default setting.
Focussing of the lens (min. distance: 0./.0/.5/.5/6.0 m)
Sets the maximum low shutter value (x, x4, x8, x6, x3, x60)
Select operating protocol
• COMMAND: Camera controlled by RS-3C command
• FASTRAX: Fastrax protocol
• PELCO-D: Pelco-D protocol
• PELCO-P: Pelco-P protocol
Activation / deactivation of the zoom function
Switches between negative and positive display. Standard setting is OFF.
Selection of colour or b/w picture. Standard setting is OFF.
38
Menu access with command: PRESET 95