Configuring The Output Turn On Turn Off Sequence (E36312A And E36313A Only); Step 1 - Set The Output Voltage And Current Of The Output Channels; Step 2 - Configure The Turn-On Turn-Off Delays; Step 3 - Coupling Selected Outputs - Keysight Technologies E36300 Série Guide D'utilisation

Configuring the Output Turn On Turn Off Sequence (E36312A and E36313A Only)

Turn-on and turn-off delays control the turn-on and turn-off timing of the outputs in relation to each other.
Step 1 – Set the output voltage and current of the output channels:
Refer to steps 1 and 2 under
that will be sequenced.
Step 2 – Configure the turn-on turn-off delays:
Press Output Settings to access the Output Settings – On/Off Delays. Enter the On Delays and Off Delays for all
outputs that will participate in the output on/off delay sequence. Values can range from 0 to 3600 seconds.
Step 3 – Coupling selected outputs:
This step is only required if you will be including some outputs to participate in an output on/off delay
sequence or if you are coupling multiple power supplies. If only a single output is to be used in the sequence,
you can skip this step.
From the menu, press On/Off Coupling to access the On/Off Coupling mode settings.
– Press Coup CH 1 to toggle between Off and On in order to turn off or on the coupling for Output 1.
– Press Coup CH 2 to toggle between Off and On in order to turn off or on the coupling for Output 2.
– Press Coup CH 3 to toggle between Off and On in order to turn off or on the coupling for Output 3.
Keysight E36300 Series User's Guide
Controlling the Outputs and set the output voltage and current values of all outputs
65