General Information - New Air NOM-40-S Guide D'utilisation

General Information

IMPORTANT!!! PLEASE READ BEFORE INSTALLING
• Let the unit sit for a minimum of 24 hours following delivery, before plugging it in.
• Make sure that the unit drops down to desired temperature before loading it with product.
• Make sure that there is proper ventilation around the unit in the area where it will operate.
• Make sure all accessories are installed (i.e. shelves, shelf clips, casters) prior to plugging it in.
• Please read through the manual in its entirety.
Installation
UNIT PLACEMENT GUIDELINES
• Install the unit on a strong and leveled surface.
- The unit may be noisy if the surface is uneven.
- The unit may malfunction if the surface is uneven.
• Install the unit in a well-ventilated indoor area.
- The unit performs more efficiently in a well-ventilated indoor area.
- For best performance, please maintain a clearance of 3" at the back of the unit.
- Outdoor use may cause decreased efficiency and damage to the unit.
• Avoid installation in a high humidity and/or dusty area.
- Humidity could cause the unit to rust and can decrease efficiency of the unit.
- Dust collected on the condenser coil will cause the unit to malfunction.
Clean the condenser at least once a month with a brush or clean cloth.
- A malfunction due to dirty a condenser will void the warranty.
• Select a location away from heat and moisture-generating equipment.
- High ambient temperatures will cause the compressor to overwork, leading to higher energy
bills and gradual breakdown of the unit
- A malfunction due to a high ambient temperature will void the warranty.
3