Important Safety Information; Installation Instructions - Dandy DUF808BSLE Guide D'utilisation

IMPORTANT SAFETY INFORMATION

GROUNDING
INSTRUCTIONS
This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug must
be connected to an outlet that is properly installed and
grounded.
WARNING: Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician of serviceman if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
Remove exterior and interior packings, wipe the
outside thoroughly with a soft dry cloth and the
inside with a wet, lukewarm cloth. Avoid placing the
cabinet in a narrow recess or near any heat source,
direct sunlight, or moisture. Let air circulate freely
around the cabinet. Keep the rear of the freezer 5
inches away from the wall.
Location:
1) Select a place with a strong, level floor.
1) THERMOSTAT DIAL: For controlling the temperature
inside the freezer. Turns the motor on as soon as the
temperature rises above the desired level.
2) REFRIGERATED SHELVES:3 full width refrigerated
shelves.
3) MAGNETIC GASKET: Tight fitting door seal keeps all
the cooling power locked inside. No hooks or latches.
4) DOOR BINS (4)
5) DRIP TRAY
This appliance must be grounded. In the event of an electrical short circuit, grounding
reduces the risk of electrical shock by providing an escape wire for the electrical current.

INSTALLATION INSTRUCTIONS

FEATURES
DO NOT USE AN EXTENSION CORD.
Use an exclusive wall outlet; Do not connect your
freezer to extension cords, or together with any other
appliance in the same wall outlet. Do not splice the
cord.
IMPORTANT WARNING: An empty freezer is a
very dangerous attraction to children. Remove either
the gasket, latches, lids, or doors from unused
appliances, or take some other action that will
gaurantee it harmless.
DON'T WAIT! DO IT NOW!
2) Allow 5 inches of space between the back of the
freezer and any adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight
may affect the acrylic coating. Heat sources nearby
will cause higher electricity consumption.
4) Avoid very moist places. Too much moisture in
the air will cause frost to form very quickly on the
evaporator, and your freezer will have to be defrosted
more frequently.
1
2
5
1
3
4