Connecting An Audio Device - LENCO LPJ-500 Mode D'emploi

Connecting an audio device

Follow the picture below to connect a device with an Audio cable.
1. Press the
connecting.
2. Use the audio cable to connect the devices as shown in the image below.
3. After you have connected both devices you will hear the sound through the
connected device.
4. Switch off both devices after use.
Station Amplifier
Connect USB Device And Micro Sd Card "TF"
Follow below picture to connect a USB stick and Micro SD card.
Turn off the projector before connecting the USB/Micro SD card.
button to turn the off power of your projector before
(Aux Out/Line Out/Earphones)
17