LENCO LPJ-500 Mode D'emploi page 16

Mains Socket
Connect HDMI Show The Image On Projector Screen
Follow the picture below to connect a device with an HDMI cable.
1. Turn off the projector before connecting the HDMI cable.
2. After connecting, press the
indicator will Light up GREEN
3. Press the
HDMI device will show on the projector screen. There are 2 HDMI inputs,
HDMI1 interface corresponds to HDMI 1 in SOURCE mode, and HDMI2
interface corresponds to HDMI 2 in SOURCE mode.
4. Press the
HDMI HD signal input: this interface can be input with HD
player HDMI output at the connection
/SOURCE button to go to HDMI mode and the video of the
button to turn off unit power.
button to turn on unit and the power
14