Operating And Use - Fakir Prestige QS 1800 Mode D'emploi

• You must connect the earthed conductor.
• Rotate the quartz light to face upwards, place cover C on the wall bracket and secure
with screws B. Thus the electrical connection is covered by the cable clip E and the
degree of rotation of the quartz light is limited to approx. 30°.
• Set the required inclination of the quartz radiator and lock into position with the screws
A.
WARNING:
Do not touch the quartz heating elements while mounting the appliance. Stains on the
heating elements will merely diminish heat radiation.
Release the screws A before changing the slant, otherwise the appliiance could be
damaged.
Operation
H
NOTE: Slight vibrations which gradually die out after the appliance has been switched
on are normal.
Operation und use
The appliance is fitted with a multi-setting, pull-cord G
actuated switch to select the heat settings indicated in
the viewing window H.
0 =
1 =
2 = 1200 watt
3 = 1800 watt
G
OFF
600 watt
11