Philips Sonicare FlexCare Platinum Connected HX9193/04 Mode D'emploi page 16

16
English
BrushPacer
2
3 1
4 6
5
Smartimer
-
To deactivate Pressure Sensor:
Press and hold the power on/off and mode
button for 2 seconds. You hear 1 beep to
indicate that the Pressure Sensor feature has
been deactivated.
-
To activate Pressure Sensor:
Press and hold the power on/off and mode
button for 2 seconds. You hear 2 beeps to
indicate that the Pressure Sensor feature has
been activated.
-
The BrushPacer is an interval timer that has a
short beep and pause to remind you to brush
the 6 sections of your mouth. Depending on the
brushing mode or brushing routine you have
selected, the BrushPacer beeps at different
intervals during the brushing cycle. See the
'Brushing instructions' sections.
To deactivate or reactivate the BrushPacer feature:
1 Place the handle with a brush head attached in
the plugged-in charger.
2 Press and hold the mode button until:
a You hear 1 beep to indicate the BrushPacer
has been deactivated.
b You hear 2 beeps to indicate the BrushPacer
has been activated.
The Smartimer indicates that your brushing cycle
is complete by automatically turning off the
toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing no less
than 2 minutes twice a day.