Backlight; Factory Reset; Software Upgrade - Tangent Danmark Dab2go BT Mode D'emploi

Backlight

1. Press MENU button and then turn TUNE/SELECT knob to select 'Backlight', press
TUNE/SELECT knob to confirm.
2. Turn TUNE/SELECT knob to select 'Power On' or 'Standby', then press
TUNE/SELECT knob to confirm.
3. Turn TUNE/SELECT knob to cycle through options: High/Medium/low, and then
press TUNE/SELECT knob to confirm the setting.
Note: In standby mode the display will light up in 5 seconds by pressing any button.
4.
Language
Press MENU button and then turn TUNE/SELECT knob to select ' Language ', press
1.
TUNE/SELECT knob to confirm.
Turn TUNE/SELECT knob to select language, and then press TUNE/SELECT knob to
2.
confirm.

Factory Reset

Sometimes, you might want delete all the settings your radio currently has, try have your
radio return to its factory default settings, please do the following:
1. Press MENU button and then turn TUNE/SELECT knob to select ' Factory Reset ',
press TUNE/SELECT knob to confirm.
Turn TUNE/SELECT knob to 'Yes', then press TUNE/SELECT knob to confirm.
2.

Software upgrade

This is for service engineer professional use only.
SW Version
The helpdesk may ask you for the software version of your product.
Press MENU button and then turn TUNE/SELECT knob to select ' SW version ', press
TUNE/SELECT knob to confirm. The software version will show on the display.
15