Specifications; Accessories; Operation-Power Tool - Textron Greenlee LRH-144 Manuel D'instructions

Specifications

LRH-144 Main Unit
Motor: 14.4 V DC
No Load Speed: 0 to 1000 rpm
Blow Rate per Minute: 0 to 3800 bpm
Maximum Drilling Diameter:
Concrete: 5/8" (16.5 mm) for work that can be
completed with one battery pack
[7/16" to 5/8" (12.5 to 16.5 mm)]
Steel: 1/2" (13 mm)
Wood: 11/16" (18 mm)
Overall Length: 9-3/4" (249 mm)
Weight (with battery): 5.1 lb (2.3 kg)
LBC-81B Battery Charger
Electrical Rating: Refer to the rating plate on the
bottom of the charger.
Weight: 2.1 lb (0.95 kg)
LBP-144 Battery Pack
Storage Battery: Li-ion battery
Battery Voltage: 14.4 V DC (3.6 V × 4 cells)
Charge Time:
Usable: 35 min
Full: 50 min

Accessories

Refer to the Greenlee Accessory Guide for accessories
that can be used with this tool.
Operation—Power Tool
• To prevent excessive temperature increase of the
tool surface, do not operate the tool continuously
using two or more battery packs. The tool needs
cool-off time before switching to another pack.
• Do not close up vent holes on the sides of the
body during operation. Otherwise, the machine
function is adversely affected to cause a failure.
• Do NOT strain the tool (motor). This may cause
damage to the unit.
• To prevent burns, use the tool in such a way as
to prevent the air from the body vent holes from
blowing directly onto your skin.
• If the tool body becomes very hot or does not
work properly, remove the battery pack and do
not use. Have it checked by an authorized service
center.
Symbol
V
n
o
rpm
bpm
9
LRH-144
Explanation
Volts
Direct current (DC)
No load speed
Rotation only
Rotation with hammering
Revolutions per minute
Blows rate per minute