Connecting The Microphones; Connecting A Guitar; Connection Via Aux-In; Connection Via Audio-Out - X4-TECH Bobby Joey Boomstar Mode D'emploi

disorientation, any involuntary movement or convulsion should
occur, the light effect should be switched off or the person
should leave the room/place.

CONNECTING THE MICROPHONES

• The unit is equipped with two coequal microphone 6,3 mm
sockets, that can be used with or without music.
• Please read and follow all safety instructions and manuals
carefully that are provided with the microphones.
• It is not possible to connect condenser microphones.
• Connect the microphone with the MIC 1 or MIC 2 jack (see 9/10)
to the unit.
• Switch on the microphone according to the manual of the
manufacturer.
• Turn on the unit as described in chapter „ON/OFF".
• Regulate the volume with MIC VOLUME (see 9/13) and VOLUME
(see 9/6) to an appropriate sound level.
• Now you can speak or sing into the microphone.
• For the usage of a second microphone, please follow the above
mentioned steps.
DANGER! Take care that you don't place the micropho-
ne too close to the speaker – otherwise an acoustic
feedback (squealing from the speakers) can happen. Higher
settings of the microphone volume will result in greater
sensitivity for acoustic feedbacks.

CONNECTING A GUITAR

• The unit is equipped with a 6,3 mm guitar jack, which can be
used with or without music playing.
• Please read and follow all safety instructions and manuals
carefully that are provided with the guitar.
44
• Connect the guitar with the GUITAR IN jack (see 9/11) to the unit.
• Switch on the guitar according to the manual of the
manufacturer.
• Turn on the unit as described in chapter „ON/OFF".
• Regulate the volume with the VOLUME button (see 9/6) to an
appropriate sound level.
• Now you can start playing your guitar. It will be amplified
through the loudspeaker.

CONNECTION VIA AUX-IN

• Plug the provided 3,5 mm cable into the socket of a personal
media player like the headphone input of your smartphone
and plug the other end into the AUX-IN jack (see 9/14) on the
backside of the unit.
• Turn on the unit as described in chapter „ON/OFF".
• Start the music on the personal media player. The loudspeaker
will immediately start the playback. To switch between tracks,
use your personal media player. The Play/Pause and track-
buttons are deactivated for the AUX-IN function and still serve
connected Bluetooth- and USB-devices.

CONNECTION VIA AUDIO-OUT

• You can connect external devices with the AUDIO-OUT RCA
plug (see 9/12).
• Please read and folllow all safety instructions and manuals
carefully that are provided with the device you want to connect.

POWERBANK FUNCTION

The unit is equipped with a 5 V DC socket (see 9/17), that can be
used to recharge USB/Micro-USB devices with the integrated
powerbank.
• Connect the device you want to recharge with a Micro-USB/
45