Bluetooth; Changing The Mode; Using The Party Light - X4-TECH Bobby Joey Boomstar Mode D'emploi

LCD display (see 9/1).
• Press >|| MODE (see 9/3) once to start the playback from track
one or from the last played track. The LCD display shows the
name of the currently played track.
• To pause the track, press >|| MODE once again.
• Press >>| (see 9/4) shortly to get to the next track. Keep on
pressing this button to fast forward through the track.
• Press |<< (see 9/2) shortly to get back to the beginning of the
track or to start the previous track. Keep on pressing this button
to navigate backwards through the track.
Note on copy protection. Under applicable law it is
forbidden to copy, transfer, lease or make available any
material protected by copyright without a permit of the
right-holder.

Bluetooth

• Turn on the unit as described in chapter „ON/OFF".
• The unit will automatically switch into Bluetooth pairing mode,
if no other device is connected. The pairing light (see 9/8) keeps
on blinking as long as the pairing mode is activated.
• Activate Bluetooth on your smartphone.
• Search for new devices on your smartphone and choose „X4-
TECH Boomstar". The pairing light will shine blue permanently,
after a successful connection.
• The LCD display shows „Bluetooth PLAYING".
• Choose the music on your smartphone to start the playback via
the loudspeaker.
• To pause the track, press >|| MODE (see 9/3) once.
• Press >>| (see 9/4) shortly to get to the next track.
• Press |<< (see 9/2) shortly to get back to the beginning of the
track or to start the previous track.
42
• Optionally you can choose the tracks or fast forward and
backward with your smartphone.

CHANGING THE MODE

• If one device is connected with Bluetooth and an additional
device via the USB-slot you can switch between these by
pressing the >|| MODE button (see 9/3).
• Keep on pressing this button until the mode switches to
Bluetooth, which is shown as „PAIRING" in the display (see 9/1),
or to USB-slot, which is shown as „MP3" on the display.

USING THE PARTY LIGHT

• Turn on the unit as described in chapter „ON/OFF".
• Press the button MODE LIGHT ON/OFF (see 9/5) for about 3
seconds until the light is turned on in light mode 1.
• To switch to the faster light mode 2 press the MODE LIGHT ON/
OFF button quickly. To get back to the slower light mode 1, press
it once again.
• To turn off the party light press the button again for about 3
seconds.
• The party light can be used with and without music, as well as
it's possible to play music without the party light switched on.
WARNING! You must not, under any circumstances,
look directly into the emitted light as this may cause
permanent damage to your eyes. Never point the LED light
directly towards other people or animals.
People suffering from photo-sensitive epilepsy, are susceptible
to epileptic seizures or loss of consciousness if exposed to
flashing lights or light patterns. If symptoms such as dizziness,
blurred vision, eye or muscle twitching, loss of awareness,
43