Proper Use; Selecting Temperature; Switch Positions - Beurer FWM 40 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
• Do not pull on, twist or sharply bend the cables.
• Do not stick pins, needles or sharp objects into this footwarmer.
• This footwarmer may not be used by children unless the switch has been preset by a parent or
supervisory person, or the child has been sufficiently instructed on how to use this footwarmer.
• Children should be supervised to ensure that they do not use the footwarmer as a toy.
• Use only the included power supply unit KL-AD3060VA or YJS020D – 1201500G.
• Please check this foot warmer frequently for signs of wear and tear or damage. If there are signs
indicating the above or if this foot warmer was used improperly, it must be returned to the manu-
facturer or retailer before further use.
• If the mains connection cable of this foot warmer is damaged, it must be replaced by the manu-
facturer, its customer service department or a similarly qualified person to avoid any risk.
• Repairs may only be carried out by specially trained personnel at a repair workshop, as special
tools are required. Incorrect repairs can lead to considerable danger to the user.
• Should you still have questions on using our appliances, please contact our customer service.

2. Proper Use

This product is intended for warming and massaging human feet. Do not use the footwarmer while
wearing shoes, as this will decrease your sensitivity to heat and soil the footwarmer. This foot-
warmer is not intended for use in hospitals or for commercial applications. In particular, it may not
be used for infants, small children, persons insensitive to heat, helpless persons or animals. The
footwarmer may smell of plastic when used for the first time, but this soon stops.
3. Operation

3.1 Selecting temperature

The footwarmer heats up most quickly when you initially set the highest temperature level (level 2). It
can then be turned down again as required.
Of course, the footwarmer can always also be used while switched off, because its 'teddy-bear'
plush will warm the user's feet even if there is no electrical outlet nearby.

3.2 Switch positions

– Only massage: (
Level I (low): calming massage
Level II (high): invigorating massage
the heat switch is on "0"
– Only heat: (
)
Level I: minimum warmth
Level II: maximum warmth
the massage switch is on "0"
– Massage with heat: (
massage and heat levels are freely selectable
– No massage, no heat:
both switches are on "0"
The massage function may only remain switched on for a maximum of 20 minutes.
)
)
,
7

Publicité

Table des Matières
loading

Table des Matières