Koenig KHB 800 Mode D'emploi page 18

English
Attention
Always ensure the appliance is disconnected
from the power supply before it is fully and
correctly assembled!
Danger of hand injury! Handle the blade
with care as it is very sharp!
Never use your hands to reach into the food
container. Always use wooden or plastic
spatulas, and only when the hand blender is
not running.
Do not use this appliance for processing
ice, hot liquids, heavy batter/dough, or hard
foods.
Select a stable flat surface for chopping.
Always take the chopper blade by its hub,
make sure not to touch the blade.
Pre-cut the food into small and even pieces
Note
When pureeing food, make sure to use
enough liquid (juice, milk, etc.) to obtain a
smooth mixture. Adjust the consistency of
the mixture by adding more liquid or soft
solids
18
KHB800_A5_140103 (1.6).indb 18
Speed settings
1 The processing speed corresponds to
the setting of the speed control. Rotate
stepless speed control to adjust the speed.
The higher the setting, the faster the
chopping results.
Maximum speed can be achieved by
pressing the MAX (Turbo) button.
Blending
Suitable for: Blending juices and shakes,
mixing soft ingredients, pureeing cooked
ingredients.
Mount the hand blender on the motor unit.
2
To do so, align the blender's
3
motor unit's icon:
4 Rotate the blender in a clockwise direction
until it clicks in place ( and
aligned).
5 Connect the plug to a suitable outlet.
6 Fill foodstuff into the measuring cup.
Observe the MAX markings on the
measuring cup.
Dip the blender bar as deeply as possible
into the ingredients. Work through the
ingredients by moving the appliance gently
up and down.
Hold the blender vertically. Tilting it might
lead to splashing foodstuff.
Set the desired speed selection. Press and
7
hold ON button. Turbo can be achieved by
pressing and holding the MAX button.
8 The anti-skid mat can be taken out as a lid
to cover the measuring cup and store inside
the fridge.
icon with the
icons are now
3/1/14 10:53 AM