Heat Settings; Automatic Shut-Off - Kenyon ALL SEASONS B70050 Mode D'emploi

ENERGIZING THE GRILL
To turn the grill ON, touch and hold the Master
Power Sensor for two seconds. The controller
will then beep and the Power On Indicator
will illuminate.

HEAT SETTINGS

Your KENYON grill has 8 different heat set-
tings, from 1 through 8, selected using the (-)
and (+) sensors. The heat setting is displayed
as shown at the right. The heating element
cycles at different time intervals to vary the
heat level. As the setting is increased, the heat-
ing element will remain on for a longer period,
increasing the cooking temperature of the grill.
TURNING "OFF" THE GRILL
To turn off the grill, simply touch and hold the Master Power Sensor for two seconds.
The controller will de-energize and shut off the heating element.
IN AN EMERGENCY THE 120V GRILL CAN BE TURNED OFF BY PRESSING THE "TEST"
BUTTON ON THE GFCI. REFER TO FIG. 5.

AUTOMATIC SHUT-OFF

The electronic control of your KENYON grill has been programmed with safety in mind and features
an automatic shut-off. The grill is programmed to shut down after a predetermined time after being
energized (see table below). The control will also shut off if it reaches a preset temperature limit. If
this occurs, allow the grill to cool down for 20-30 minutes.
MASTER
POWER SENSOR
16
POWER ON
INDICATOR
POWER LEVEL
DISPLAY (HEAT
SETTING 8
SELECTED)