Automatic Operation; Battery Replacement - Drive RTL10275 Instructions

To fold, depress push pin and fold leg inward. Repeat for second
leg. (see figure D).
figure D
1. MODE (Red Button): This control allows you to select a parti-
cular function.
To Start, press and hold the red Button for 4 seconds. The LED
will display the different functions (If after turning on and there is
no activity, the unit will automatically shut off).
2. To select a function, wait until the 4 seconds set up is comple-
te. Push the Red Button and the arrow will move through the
functions. When the desired function is selected, simply use the
peddler and the unit will calculate the exercise.
3. COUNT (CNT): Determines the amount of steps while operating
the peddler.
4. TIME: Determines the amount of time the peddler has been
operating.
5. CALORIE (CAL): Determines the amount of calories burned
while using the peddler.
6. REPS PER MINUTE (R.P.M.) Automatically calculates the repe-
titions per minute.
7. SCAN: Will automatically review the results of all functions.
To reset the display to zero, press the Red Button (RESET) 3
seconds.
If the display does not come on or reads incorrectly, the battery
requires replacement.
folding

automatic operation

battery replacement

To replace the battery
the lid with retaining clip
the back of the display down,
replace the underlying battery
and set the display back on.
ded
fol
slide
on