Braun Silk-épil EverSoft Solo 2170 Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
against your skin and guide it
against the hair growth and in
the direction of the switch. When
using the EverSoft attachment,
make sure that both wheels are
always kept in contact with the
skin. Do not press too hard.
3. Leg epilation
Epilate your legs from bottom
upwards. When epilating behind
the knee, keep the leg stretched
out straight.
4. Underarm and bikini line epilation
User tests monitored by dermatol-
ogists have shown that you may
epilate under the arm and at the
bikini line as well. Be aware that
these areas are particularly
sensitive to pain. However, the
pain sensation will diminish with
repeated usage.
For this specific application, we
would like to give the following
advice: Before epilating,
thoroughly clean the respective
area to remove residue (like
deodorant). Then dry with a towel,
carefully using a dabbing action.
When epilating underarm, keep
your arm raised up and guide the
appliance in different directions.
Cleaning the epilator head
5. After epilating, unplug the
appliance and clean the epilator
head: First take off the EverSoft
attachment
1
rolls.
8
and brush out the
6. Thoroughly clean the tweezer
element with the cleaning brush
and also with cleaning fluid
(e.g. alcohol). While cleaning,
you can turn the tweezer element
manually. To remove the epilator
head, press the release buttons
on the left and right and pull it off.
7. Give the top of the housing a quick
clean with the brush. Put back on
the epilator head and the EverSoft
attachment.
Subject to change without notice.
This product conforms to the
EMC-Requirements as laid
down by the Council Directive
89/336/EEC and to the Low
Voltage Regulation (73/23 EEC).
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Silk-épil eversoft solo 5316

Table des Matières