Cleaning; Disposal; Troubleshooting; Repair - weinor BiEasy 1M Instructions D'utilisation

Cleaning

Cleaning
Clean the device with a damp cloth. Do not use a detergent. This
may attack the plastic.

Disposal

Dispose of the device in accordance with the relevant regulations
when you no longer need it.

Troubleshooting

Fault Cause
Drive not running, 1. Batteries are
status display does exhausted
not light up 2. Batteries are incor-
rectly installed
Drive not running, 1. Receiver out of
status display fl ashes radio range
red or orange 2. Receiver not oper-
ating or faulty
3. Receiver not yet
programmed
Drive runs in the Directions are incor-
wrong direction rectly allocated

Repair

Please contact your dealer if you have any questions.
Please always provide the following information:
• Item number and name on the type plate
• Type of fault
• Unusual events occurring prior to fault
18 | EN © weinor GmbH & Co. KG
Remedy
1. Insert new batteries
2. Insert batteries
correctly
1. Reduce distance to
the receiver
2. Switch on or re-
place receiver
3. Program receiver
Delete transmitter and
reprogram
Repair
• Accompanying conditions
• Own suspicion
© weinor GmbH & Co. KG EN | 19