Dynex DX-R32TV Guide De L'utilisateur page 8

8
To Audio
To
OUT
Component
OUT
Audio cord Video cord (not
(not supplied) supplied)
To Audio IN
To
COMPONENT IN
Note:
This television is only capable of displaying 480i interlaced signal when
connected to a digital device with component video outputs. If you
input a 480p, 720p, or 1080i signal to the component video inputs,
COMPONENT is displayed on a black screen. If COMPONENT appears,
set the digital device's component output to 480i.
Connecting the television to a DTV receiver or
set-top box
If you connect a DTV receiver/set-top box, connect your television to it by
using a component video cord.
To
To Component OUT
Audio
OUT
Video cord (not
supplied)
Audio
cord (not
supplied)
Rear of the TV
Rear of the TV
Rear of the TV
Connecting the television to an AV amplifier
The exact configuration to connect various video and audio components
to the television depends on the model and features of each component.
Check the owner's manual provided with each component for the
location of video and audio inputs and outputs.
To Audio IN
Audio cord (not
supplied)
Connecting the television to a camcorder
To play back from a camcorder, connect the camcorder to the television
as shown.
To Audio/Video OUT
Audio/Video cord (not
supplied)
Connecting the television to a video game
console
The television can also be used as a display device for many video games.
However, due to the wide variety of signals generated by these devices
and subsequent connection variations required, they have not all been
included in the suggested connection diagrams. You'll need to consult
each component's owner's manual for additional information.
Video Game
Console
To Audio/Video OUT
Audio/Video cord (not
supplied)
Setting up the television
Amplifier
Rear of the TV
Front of the TV
Front of the TV