Listening With Headphones - RIP TUNES RACR-400 Mode D'emploi

RECORDING FROM THE MIC/RADIO
Recording to Cassette Tape using the Built-in Condenser Microphone
1. Open the Casette Tape dock (4) by pressing the Cassette Tape
STOP/EJECT button (9)
2. Insert the cassette tape
3. Push the Casette Tape dock closed until it clicks
4. Move the Mode Switch (12) to the Tape position
5. Press the Cassette Tape RECORD button (6) to begin recording
6. Press the Cassette Tape PAUSE button (10) to pause recording
or the Cassette Tape STOP/EJECT button (9) to stop recording
1. Open the Casette Tape dock (4) by pressing the Cassette Tape
STOP/EJECT button (9)
2. Insert the cassette tape
3. Push the Casette Tape dock closed until it clicks
4. Move the Mode Switch (12) to the desired AM/FM SW1/SW2 Ra-
dio position
5. Press the Cassette Tape RECORD button (6) to begin recording
6. Press the Cassette Tape PAUSE button (10) to pause recording
or the Cassette Tape STOP/EJECT button (9) to stop recording
For private listening:
1. Insert the plug of a headphone (not included) into the Head-
phone Jack
2. Adjust the Volume Control (2) to the desired listening level
NOTE: When headphones are connected, the built-in speaker is
automatically disconnected.
Recording from the Built-in Radio

Listening with Headphones

10