Before Use; Filling The Water Tank - Umuzi Cleaning UZ-CL-STIS01 Manuel D'utilisation

C
B
D
A
3
2
5
1
4

Before use:

• Remove the device and accessories from the box. Remove any stickers, protective film or plastic from
the device.
• Make sure the plug is removed from the electrical outlet.
• Before you use the device for the first time, wipe all the removable parts with a damp cloth. Never use
aggressive or abrasive cleaning materials, a scouring sponge or steel wool; these damages the device.
• Place the device on a flat and stable surface, on a location where it cannot fall over.

Filling the water tank

To add water to the water tank (1), remove the detachable water tank by pulling the water tank handle (3).
Add water into the water tank (1) by holding the filling aperture (2) under the running water tap or by
using a measuring cup until it has been filled to the maximum level (1.2 L). Then insert the water tank back
by pressing it in the base unit until you hear a click.
Note! Do not exceed the "MAX" water level indicated on the water tank.
EN-5