Motorola S805 Manuel D'utilisation page 9

English
Pairing your headphones and phone
Your phone's Bluetooth feature is off by default. Make sure the Bluetooth
feature is permanently turned on in your phone. Please check your phone's
user's guide.
Before you can use your headphones, you must pair (link) them with your
phone first.
1 With the headphones' power off, press and hold the Call button for
6-10 seconds until the indicator light turns on and remain steadily lit.
If the indicator light is flashing or does not remain steadily lit, turn off the
headphones and repeat this step.
2 Perform a device discovery (or scan) from the phone. For details about
device discovery, consult your phone's user's guide. The phone lists
Bluetooth devices it finds.
3 Select Motorola S805 in the list of discovered devices and confirm by
following the on-screen prompts.
4 When prompted by the phone, enter the passkey 0000 and confirm.
When your headphones successfully pair with your phone, the
light changes from steadily lit to rapidly flashing.
Pairing your headphones and audio device
To use your headphones for streaming audio, you must pair them with
your audio device.
1 Place your headset in pairing mode.
2 Place your Bluetooth audio device in pairing mode. See your Bluetooth
audio device's user guide for details.
3 Place headphones and audio device close together while in pairing
mode.
When your headphones pair successfully with your audio device, the
indicator light changes from steadily lit to rapidly flashing.
6
Y indicator
Y