ELAC Discovery Z3 Manuel D'instructions page 9

Listening to Bluetooth Audio
Pairing your Bluetooth Smartphone/Tablet for Audio
Note: Please note that this process is only for playing back audio from your Bluetooth device. It is not necessary
to pair your device when using the App.
You can begin the paring process by using the smartphone application or the front panel.
Front Panel Pairing Process
1. Press and hold the Play/Pause button (Fig 1) for 5 seconds or until the LED status light begins flashing red.
2. Go to the Bluetooth settings section on your smartphone and scan for new devices (Fig 2). Select the
Discovery Z3 from the list of available devices. If prompted for a pass code, accept the one that is displayed
on your device and choose pair/connect. All Audio from your connected device will now come from the
Discovery Z3. Please note that when using Bluetooth you will have
two volume controls (Phone and Z3)
App Pairing Process
1. Download and install the Discovery Z3 App from the Google Play Store or Apple
App Store
2. Launch the App and select the Discovery Z3 from the list of devices (If this is your
first time using the app). On the Control page activate the Bluetooth Discoverable
On/Off selection (Fig 3).
3. Go to the Bluetooth settings section on your smartphone and scan for new devices
(Fig 2). Select the Discovery Z3 from the list of available devices. It prompted for a
pass code, accept the one that is displayed on your device and choose
pair/connect.
Bass Enhancement
The bass enhancement feature allows you to tailor the amount of bass enhancement
when using the 3.5mm Input, AirPlay, and Bluetooth. This process is automatic when
using Spotify Connect and Roon Essentials/Roon.
ELAC Discovery Z3 | www.elac.com | Page 8
Fig 1 Fig 2
Fig 2
Fig 3