Connecting To Your Home Network - ELAC Discovery Z3 Manuel D'instructions

Connecting to your Home Network

Wired Connection
1. Connect an Ethernet cable (Not provided) to an available LAN port on your router or switch to the Ethernet
input on the back of the Discovery Z3 Speaker.
2. Apply power to the Discovery Z3 by connecting the power cord to an available outlet and to the power input
on the Z3.
3. The status LED will begin flashing during the power on phase and will go solid once it has connected to the
network and is ready to play music.
Wi-Fi Connection
1. Download the Discovery Z3 App from the Google Play store or Apple App Store.
2. Ensure Bluetooth is enabled on your phone/tablet and launch the Discovery Z3 Application.
3. The app should find the Discovery Z3 as shown in the Fig. 1
4. Select the Discovery Z3 and you will be taken to the main menu. Select WiFi Setup from the top.
5. You will be shown a list of all available wireless networks as shown in Fig 2. Find yours and select it. If your
network is password protected please enter the password as shown in Fig. 3 and choose submit. The unit
will reboot and you will connected to your home network.
Fig 1
ELAC Discovery Z3 | www.elac.com | Page 6
Fig 2 Fig 3