LEXIBOOK Connect' Spy Move Mode D'emploi page 15

8. Once the installation is complete, you can click on "Done" to go back to the "Explorer" application or you can click on
"Open" to open the application.
Note: The installed application is now available in the list of applications, which you can access by clicking the button with
six little white dots in the top-right corner of the screen, from the homepage of your Lexibook® tablet.
On a tablet with interface
In this example, we have used our Lexibook® tablet (MFC410EN).
1. Select your profile.
2. Select the "Multimedia" menu, and then click on the "Explorer" application.
3. Once in the "Explorer" application home page, please follow steps 6 to 8 in the section "How to transfer and install the
application on your tablet".
Note: to install the Connect' Spy Move® application on a device other than a Lexibook® tablet, please refer to the device's
instruction manual.
Connecting to the car's Wi-Fi
1. After installing the Connect' Spy Move® application on your Lexibook® tablet, turn the car on by sliding the switch to ON
position. The orange power LED lights up. Wait approximately 30 seconds for the blue connection LED to blink.
MFG230IM1523_23Dec_V14.indb 15
15
23/12/2013 2:24 PM