KaWe H-600 Mode D'emploi page 5

A
Tighten the light conducting
cable
1. 1. c.
1. Insert the cable
2. Close the fixing strap
B
Adjust headband
1. 1. c.
1.
Adjust width of head and
height of headband
2.
C
Halogen light source
• Push the plug with the suitable adapter
into the halogen light source.
• Turn ON
• Regulate the lightness by means of the light
source.
• Carry out inspection and operational check prior
to every start-up!
! Attention!
Prior to periods of non-use remove the plug of the
light conducting cable from the light source.
D
Adjust direction of light
1. 1. c.
Unscrew the knurled head screw.
1.
2.
Adjust desired light direction.
3. Tighten the knurled head screw.
E
Adjust light spot
1. 1. c.
Infinitely adjust large or
1.
small cone of light
2.
Distance
20 cm
Light
55 - 130
spot ø
mm
F
Remove headband padding
1. 1. c.
1.
Open the snap fasteners,
remove headband padding
Subject to technical modifications without prior
notice.
kopflampe H 600 6 2008.indd 5
30 cm 50 cm
85 - 200 140 - 350
mm mm
A
1. 1. c.
1.
B
1.
2.
C
D
3.
1.
E
1.
F
1.
2.
2.
2.
5
05.07.2008 22:01:25