OSCAR OS10 Mode D'emploi page 27

Felt cover heater:
The special felt cover can be spliced with aluminum alloy collector
(OS10H/20/22/30/32/40/42) and installed on a flat roof or wall. The air through the black felt
gap (air intake volume remains unchanged) can efficiently absorb the heat of the sun,
thereby increasing the temperature of the outdoor fresh air entering the room. As long as
the felt cover is spliced, the temperature of the fresh air entering the room can be
increased: F7----about 10℃; F11----about 15℃; F20----about 20℃.
After a long period of outdoor dust and rain test, the air intake volume is reduced by up to 3%.
It can effectively filter Dust and become clean after rain washing, no maintenance is required.
The service life is more than 5 years.
Felt cover
(Can't be used alone)
Appro temperature rise
Max performance(w/h)
Estimated energy supplement
kwh/unit/year
Product area
Product size(cm)
Carton size(cm)
Net weight
Gross Weight
F7 For F11/F11H(horizontal)
OS10H/20/22 for OS30/32
0
10 C 15
520W 800W
525kwh 770kwh
0.7 ㎡ 1.1 ㎡
101x72x6 121x92x6/92x121x6(F11H) 197x100x6
101x10x10 118x12x12
2KG 3KG
1.5KG 2.5KG
26
0
C
F20
for OS40/42
0
20 C
1200W
1360kwh
2 ㎡
110x18x18
6KG
5KG