Inserting Batteries - Abilia IR-1SP Micro Manuel

Inserting Batteries

Unscrew the screws holding the bottom of the IR-1SP Micro using a Phillips screwdriver. Remove
the bottom and insert three 1.5V silver oxide batteries type SR44, or 401930 Battery pack for Micro
and Wrist transmitters, available from Abilia or Abilia dealer. Insert the batteries according to the
guidelines at the bottom of the battery compartment. Pay attention to the polarity! It is important to
use specified batteries for maximum transmission range.
When you have inserted the new batteries, press the programming button
Fig 2
Programming button
GEWA AB
Batteries: 3 x SR44
or 401930 Battery pack for Micro and Wrist transmitters
P
12
P
on the underside.