En: English Manual Gewa Ir-1Sp Micro; Introduction; Product Description; Intended Purpose - Abilia IR-1SP Micro Manuel

EN: English Manual Gewa IR-1SP Micro

Introduction

Product description

The IR-1SP Micro is a programmable IR transmitter, which can learn one channel from another
remote control for TV, DVD, stereo etc. The IR-1SP Micro is a part of the "GewaLink-system" and
therefore can be used together with all of these products.

Intended purpose

IR-1SP Micro is a simple remote control with only one button intended to support people who are
unable to use a standard remote control due to motor, tactile or visual impairments. The device can
help the user control electronic equipment at home, including lighting and door openers. The device
is intended for indoor and outdoor use.

General information about IR-1SP Micro

Before using your IR-1SP Micro there are certain things that you should know:
•
On delivery the GewaLink channel 16 is factory programmed, meaning that it is possible to use
the transmitter immediately after the batteries has been inserted. See section Inserting
Batteries.
•
For programming press the programming button
the same time as you press the function button
•
If you press the wrong button or make a mistake when programming you can always press the
programming button
•
It is important not to wait too long between the different steps when programming. After a
certain time your IR-1SP Micro automatically leaves the programming mode to save power.
This picture shows the various terms and functions which are described in the text.
Fig 1
The following symbols appear in the text throughout this manual:
P
= programming button
O
= function button on the IR-1SP Micro
Y
= Any button on another transmitter to be programmed
P
. It works as a Reset-button.
Indicator light
Function button
P
(using a pen tip or other narrow object) at
O
.
Programming button
(reset)
GEWA AB
O
11
P