Samsung RL1505SBASR Manuel D'utilisation page 18

Installation
STEP 3 Adjust the levelling legs
CAUTION
• The refrigerator must be levelled on a flat, solid floor. Failing to do so can cause damage
to the refrigerator or physical injury.
• Levelling must be performed with an empty refrigerator. Make sure no food items
remain inside the refrigerator.
If the front of the appliance is slightly higher than the rear, the door can be opened and
closed more easily.
Case 1
STEP 4 Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1. Plug the power cord into the wall socket to turn the refrigerator on.
2. Open the door, and check if the interior light lights up.
3. Set the temperature to the coldest setting, and wait for about an hour. Then, the freezer
should be slightly chilled, and the motor should be running smoothly.
4. Wait until the refrigerator reaches the set temperature. The refrigerator is now ready
for use.
STEP 5 Final check
When installation is complete, confirm that:
• The refrigerator is plugged into an electrical outlet and grounded properly.
• The refrigerator is installed on a flat, level surface with a reasonable clearance from the
wall or the cabinet.
• The refrigerator is level and is sitting firmly on the furniture.
• The door opens and closes freely, and the interior light turns on automatically when you
open the door.
18 English
Barosa_NA_DA68-02676V-01_EN.indd 18
Case 1) The appliance tilts down to the left.
Turn the left adjusting leg in the direction
of the arrow until the appliance is level.
Case 2) The appliance tilts down to the
right.
Turn the right adjusting leg in the direction
of the arrow until the appliance is level.
Case 2
2020-06-10 2:58:02