Cleaning The Nozzles - Samsung DW80N3030U Série Manuel D'utilisation

4. Remove any dirt or other remains from the fil ter, and then rinse
under running water.
5. Reassemble the f ilter in the reverse order of the disassembly, re-insert
the f ilter insert, and then rotate clockwise as shown until close .
If the fil ter insert is not closed properly, its performance will
be decreased.
CAUTION

CLEANING THE NOZZLES

If your dishwasher does not seem to be cleaning adequately or the nozzles seem clogged, you can clean
each of the nozzles. When removing the nozzles, take care as they may break.
Lower nozzle
1. Check whether the nozzle holes are clogged by food particles.
2. If cleaning is needed, remove the nozzle by pulling it upwards.
3. Clean the nozzle, and then push it back into place.
4. Check whether the nozzle is engaged correctly by rotating it by hand.
it
d
English - 20