Installation - Danfoss Link HR Guide D'installation

Installation Guide

Installation

The Danfoss Link™ wireless system's transmission range is
sufficient for most applications; however each building has
different obstacles affecting communication and maximum
transmission distance .
If communication problems occur Danfoss suggests that
accessories would be required to support the system, such as
repeaters . In exceptional cases the wireless system may not be
suitable for your installation .
Please be aware of the following, when installing Danfoss
Link™ HR:
Installation and placement must be according to
local building regulations.
Operation mode
Danfoss Link™ HR supports two types of operation modes:
1 . ON/OFF switching.
2 . Heating regulation: when using Danfoss Link™ HR as heat-
ing regulation in a room you also have to install a Danfoss
Link™ RS .
Note! Do not install electric floor heating system without a floor
sensor, when the heating element is installed on or beneath
wooden surfaces and other surfaces sensitive to temperature!
6
Danfoss Link™ HR
VISGX45X © Danfoss 04/2011