General Installation Guidelines - Danfoss GX Manuel D'installation

General Installation Guidelines

Planning
It is recommended to sketch a plan of the layout for the heating system installation. Mat/cable
location, sensor placement, junction boxes, conduits and the location of drains and other
obstructions should be noted.
Mat Alterations
The GX heating mats can be altered to accommodate drains, obstructions or bends in the layout.
By carefully cutting the mat tape, many patterns and designs can be created The figure below
illustrates this.
Free Cable and Cable Strapping
Should the Danfoss cable strapping be used for the GX cable, follow the instructions below for
ease of installation.
Attach the Danfoss
Place the GX cable
Clip the GX cable
strapping to the
(3" standard
in place
ground surface
spacing)
(3' apart)
Copyright 2009 Danfoss Inc. 088L3370 - 06/09
TEL: 866-676-8062. FAX: 905-285-2055 5