Operation Instructions/Flame Appearance - Empire Comfort Systems OLL60FP12S-1 Instructions D'installation Et Mode D'emploi

OPERATION INSTRUCTIONS/FLAME APPEARANCE

LED Brightness Button
Press the Brightness Button to activate the LED lights and to
cycle LED Intensity from High to Low to Off.
1 – On – High
2 – Medium
3 – Low
4 – Off
Use the Brightness Button in conjunction with the Mode Button to
create unique looks.
If no change is made to the LED lights, they will turn off automati-
cally after two hours.
Lights will remember the last mode when turned on again. (After
a power failure, you must reset the lights to the desired mode.)
Turn off the LED Lights when not in use.
LED Mode Button
Press the Mode Button to adjust LED light system from Automatic
Color Changes to Individual Colors.
1 – Auto-cycle – Rapid
2 – Auto-cycle – Gradual
3 – Pause Auto-cycle
4 – Deep Blue
5 – Royal Violet
6 – Cardinal Red
7 – Sea Green
8 – Forest Green
9 – Tranquil Blue
10 – White
If the LEDs are turned off using the Left button, the chosen color or
cycle will continue when the LEDs are turned back on.
Left Button Right Button
"ON" - High Mode selection
- Medium
- Low
"OFF"
Figure 32 - Controls
Note: LED lights will automatically turn off after two hours.
Pushing left button will turn LEDs on using last mode selected.
35008-3-1015
Ignitor Button
Control Knob
Flame - OFF
- High
- Medium
- Low
Page 25