Operation Safety; Parts Description - Byron DIC-24815 Mode D'emploi

1 Safety
1. Please read these instructions carefully before installing and
using the product.
2. Do not cut the power supply cable to extend it; the device
(transformer) will not work with a longer cable. Do not plug in the
device until all the wiring has been finished.
1.1

OPERATION SAFETY

1. Do not operate electrically powered products in explosive
atmospheres, such as in the presence of flammable liquids ,
gases, or dust. Electrically powered products create sparks which
may ignite the dust or fumes.
2. The warnings, precautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
3. Do not expose the Power Adapter of this product to rain or wet
conditions. Water entering the Power Adapter will increase the
risk of electric shock.
4. Do not abuse the Power Cord. Never use the cord for unplugging
the plug from the outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
5. The adapter must match the outlet. Never modify the plug in any
way. Unmodified plugs and matching outlets will reduce risk of
electric shock.
2

Parts description

Indoor unit
1. Power indicator LED
2. Microphone
3. Pair button
4. Set Ringtone volume
5. Arrow buttons (Set melody)
6. Talk button
Outdoor unit (doorbell)
1. Power indicator LED
2. Microphone
3. Speaker
4. Call button
5. Reset button
3 Pairing
To pair the indoor unit to the outdoor unit follow below procedure.
A. On the indoor unit: Press the pair button.
B. On the outdoor unit: in standby mode, press the call button and
then press the reset button.
ð The LED on the left will start flashing rapidly in blue.
ð When the LED turns off, pairing mode is exited and pairing is
successful.
Repeat these steps to pair additional indoor units.
4 Installation
To mount the outdoor unit, you will need the following tools:
ü A suitable screwdriver for the included screws.
Instruction manual
EN
3