DeLOCK 42371 Manuel D'utilisation page 3

Hardware Installation
Note:
Follow the general instructions for installation of the adapter. If necessary, read
the manual of your computer, or ask a specialist for help.
1. Remove the panel, and remove the accessories from the housing.
2. Connect the HDD to the IDE and Power connectors.
3. Remove the rails on both sides, insert the HDD into the housing, use the
supplied screws to fasten the HDD, and then reattach the rails.
4. Use the screws to attach the housing.
5. Connect the power adapter to the enclosure and the line cord to the adaptor
and power outlet.
Driver Installation
1. Switch on your computer.
2. Connect the USB cable with the enclosure and an available USB port of your
computer. Switch the case ON.
3. The external drive will be recognized and you can start using the device
immediately.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by which means, electronically or mechanically,
without explicit written approval of Delock.
Edition: 02/2012
- -