Table des Matières
Publicité
Operation Instruction
1.
In order to charge your notebook, choose the right notebook connection tip and link it
with the USB notebook power supply cable (picture A).
2.
Plug the tip into your device and connect the USB end of the cable with one
of the USB-A output ports on the charger (picture B).
3.
Connect the AC input power cable with the charger and plug the other end into the
wall socket (picture C).
4.
If you want to charge USB-C devices, connect the USB-C power supply cable with the
USB-C output port of the charger and insert the other end into the power port of your
device (picture D).
5.
If you want to charge other USB devices, connect the device's original USB cable to any
free USB-A output port (picture E).
Caution:
This adapter supports max. 80 W power. If the electricity power exceeds 80 W,
the adapter will automatically switch-on the over-load protection. Re-plug the connection to
recover to normal work.
A
B
C
D
E
Publicité
Table des Matières
