Samsung DV45K7600E Série Mode D'emploi page 37

My Cycle (DV45K7100E(G)*)
You can create your own cycle that
contains your preferred settings and use it
at your convenience.
1. Press My Cycle to select a cycle. The
cycle indicator turns on.
2. Set or change the settings (Dry Level,
Temp., Time, etc) and/or options as
necessary. Each corresponding indicator
blinks.
3. Press and hold My Cycle for 3 seconds.
The dryer stores the selected cycle with
its settings.
To use My Cycle at a later time, simply
press My Cycle.
NOTE
Wrinkle Prevent is not available with My
Cycle.
Smart Care
If the dryer displays an information
code, you can use Smart Care to check
the status of the dryer on a smartphone.
To use Smart Care, you must have the
Samsung Smart Care app installed on your
smartphone.
NOTE
Smart Care is optimized for Samsung
Galaxy and Apple iPhones. (Not compatible
with some models).
Download the Samsung Smart Care app
from the Google Play Store or Apple
App store (Search term: "Samsung Smart
Washer/Dryer"), and install it on your
smartphone.
If an information code appears on the
dryer, follow these steps:
DV7700K-03170U-01_EN (US).indd 37
1. Press and hold Press and hold Anti
Static (DV45K7600E(G)*), or Sound
(DV45K7100E(G)*8) for 3 seconds to
activate Smart Care. The Smart Care
indicator turns on.
2. Open the Smart Care app on your
smartphone.
3. Put the smartphone's camera close
to the display of the dryer. The
app automatically recognizes the
information code, and displays
suggestions on your smartphone.
4. If the smartphone fails to recognize the
information code more than twice, type
the information code manually into the
Smart Care app.
CAUTION
• If light is reflected on the display of
the dryer, the smartphone may not
recognize the information code.
• If you hold the smartphone at an angle
to the dryer's display, the smartphone
may not recognize the information
code. For best results, hold the
smartphone so that the front of the
panel and the smartphone are parallel
or nearly parallel.
• After you use this function, the dryer
will delete the record of the information
code from its code log.
English 37
2015-12-29 12:08:30