Grant Optima TX150 Mode D'emploi page 29

High Alarm
Temperature
 
.
Latching
On
Relay
On
Buzzer
Off
Alarm Settings
High Alarm mode Fixed Temp
Low Alarm mode Disabled
Holdoff (s)
TX150 & TXF200
Operating Manual
5. Temperature is highlighted, press S to select.
°c
 
.
6. Rotate the dial to define the temperature value,
°c
press S to set.
7. Rotate the dial to highlight latching, press S to
select.
Save
8. Rotating the dial will display on/off, press S to
select.
When latching is on, a temperature alarm
continues unless acknowledged by the user even
if the temperature comes back in range
9. Rotate the dial to highlight relay, press S to select.
10. Rotating the dial will display on/off, press S to
select.
11. Rotate the dial to select buzzer, press S to select.
°c
 
.
12. Rotating the dial will display on/off, press S to
select.
13. Rotate the dial to save, press S. The display
returns to the alarm settings screen. The
procedure can be repeated to configure a

deviation alarm and for the low alarm function.
Save
14. Rotate the dial to highlight holdoff, press S to
select.
15. Rotate the dial to select a holdoff time (over a
range of 5 to 600 seconds), press S to select.
Rotate the dial to save, press S to save all
settings.
The display will return to the settings menu
16. Press F to return to the home screen
www.grantinstruments.com
EN
30424 V3
Page 28