Publicité
Les langues disponibles
Les langues disponibles
– Z.A
1074, A
C
VENUE DES
ARRIERES
13830 ROQUEFORT LA BEDOULE – FRANCE
www.ermax.fr - e-mail : accueil@ermax.fr
Fitting kit
- 1 ABS dashboard
- 3 rubber inserts M5
- 6 screws BHc 5×15 (big head)
- 2 screws BHc 5×25 (big head)
- 2 plastic spacers Ø6 L10mm
- 3 plastic washers Ø5
- 1 threaded fastener M5
Fitting instructions
- Remove the meter top cover and place the threaded
fastener as shown on the photo.
- Fit the ABS dashboard on the 3 threaded fasteners
(2 original and 1 placed previously) thanks to the 3
screws BHc 5×15; and then fit the rubber inserts.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
* Screens damaged by an inadequat washing are not guaranteed (abrasive, corrosive ... products, solvent, thinner, benzine ...). Wash immediately brake or battery fluid which may flow on accessories.
P
C
III
LA
LAINE DU
AIRE
FITTING INSTRUCTIONS
ERMAX HP& SPORT NOSE SCREENS
ADAPTABLE ON GSX-S 1000 2015 → ∞
- For the High Protection nose screen
Place and fit the nose screen using screws 5×15 and
plastic washers.
- For the Sport nose screen
Place the nose screen and fit it on the lower fitting point with
one screw BHc 5×15 and one washer.
For the 2 upper fitting points, use screws BHc 5×25, plastic
washers and insert the plastic spacers Ø6 L10 between the
nose screen and rubber inserts.
« CAUTION »
Estimated mounting time: 30 mn
Publicité
