Identification Of Machine Components; Cutting Board - Logan 350-1 Manuel D'utilisation

Instruction Manual
Congratulations on your purchase of the Logan Compact Elite Mat Cutter.
This versatile and dependable tool will prove to be a useful device for those seeking professional results from a low priced, easy to use mat cutter.
This instruction manual is written to aquaint you thoroughly with this product. Please take some time to familiarize yourself with it before cutting. You
will find that the time taken will be well worth it and you will be cutting quality mats in no time.
CHECK OF CONTENTS:
350-1 Compact Classic - 32" base board with Mat Guide, Straight Cut Measuring Bar, Measuring Bar Stop, 2 Guiderail Stops, Bevel Cutting Head,
Straight Cutting Head, Slip Sheet, Instructional DVD and 1 five pack of Logan #270 blades.

IDENTIFICATION OF MACHINE COMPONENTS:

Cutting Board

Slip Sheet
A Slip Sheet is a piece of
scrap mat board that is
placed beneath the mat
when bevel cutting
Cutting Board
Vinyl covered base
board of machine
Mat Guide
Used to set the border
width of a mat and
keep the mat in position
Squaring Bar
Used to hold the matboard
90º square to the guiderail
Warranty
Logan Graphic Products, Inc. ("Logan") warrants the 350-1 COMPACT ELITE to be free from defects in parts and workmanship for a period of two years
from the date of original purchase. Logan warrants that it will either repair or replace, in its sole discretion, any necessary replacement parts found to be
defective. Should the product need to be returned to Logan for repair or replacement parts, authorization for any return must come from Logan in writing.
Costs of returning the product to Logan, including insurances, shall be borne by the purchaser. Logan shall not be liable for any damages or losses,
incidental or consequential, direct or indirect, arising from the use of this product. This warranty extends only to the original purchaser and is not assignable
or transferable. This warranty is in lieu of all other warranties, expressed or implied.
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com
Compact Elite Mat Cutter
Guide Rail
Used to guide cutting
heads while in use
Measuring Bar
20in (51cm) removeable
scale & stop used to cut
matboard to size
Rail Stop
Used when cutting many
mats the same size
Logan Graphic Products, Inc.
1100 Brown Street
Wauconda, IL 60084
800/331-6232 or 847/526-5515
Bevel Cutting Head
Start and Stop
Indicator
Line which shows
where to begin
and end cut
Straight
Cutting Head
Model 350-1
Blade Holder
Blade holding device which slides,
allowing blade to cut into mat
Blade Knob
Holds blade in
place for cutting.
Nylon Guides
Guides which allow Bevel
Cutting Head to hook
onto Guide Rail
Blade Holder
Block which holds blade in place
while cutting. Has three separate
depth settings.
Blade Cover
Covers blade
on Blade Holder
Blade Screw
Holds blade in
place inside
Blade Holder
2