Oehlbach Flat Style One Mode D'emploi page 7

Flat Style One
Thank you
for choosing an Oehlbach product. The Oehlbach Flat Style One has been developed
to enable a sharp and clear reception of digital signals. The development department at Oehlbach has
created an antenna that combines state-of-the-art technology with exceptional design. The Flat Style
One can be installed within minutes and is easy to use. The antenna features a specially developed
receiver system which detects signals through 360 degrees (horizontal and vertical signals). This
means no further adjustment is required after the one-off installation process.
Before starting to use the antenna you should read this user manual carefully and remove all parts
from the packaging.
The Flat Style One box contains the following items:
· Flat Style One antenna
· Amplifier (Power Inserter)
· Mains adapter (The device may only be operated with the supplied power pack „Model:
S003ATV0500015").
· User manual
Optimum location for the antenna
Before connecting the antenna you should determine the best location for optimum reception.
Installation close to a window usually offers the best results. DVB-T2 receivers often have a signal
strength indicator (level meter), which can be used to locate the best position for the antenna.
The antenna is designed in such a way that horizontal and vertical signals can be received without
altering the position. Nevertheless, the best position can vary depending on the place of installation.
It must also be noted that digital terrestrial signals can be reflected by various objects, and that this
too can have an impact on the reception quality and position. Please try different positions before
installing the antenna in its final position.
Please note: Do not position the antenna next to large metal objects or devices that can cause
interference.
Connecting the Flat Style One
You can use the Flat Style One with or without power connection to the amplifier (Power Inserter). In
most cases the power should be connected to the amplifier for best performance. However, it may
make sense to use the antenna without power at the amplifier. One such circumstance is if you are
located in close proximity to the radio mast, as the additional gain produced will result in a distorted
signal.
Note: If you locate some stations that can only be received without amplification, try unplugging
the mains adapter of the amplifier. If your TV is equipped with an integrated DVB-T2 tuner, you can
connect the Flat Style One directly to the TV. Otherwise, you can connect the Flat Style One to a set-
top box (DVB-T2 receiver).
7
Flat-Style-One_Manual.indd 7 03.05.2019 09:26:15