Overload Protection - Flex FX6151 Manuel De L'utilisateur

OPERATING (FIG. 9)
a. Only turn on the tool after the mixer paddle
has been immersed in the product to be
mixed. When doing this, slowly press the
switch and wait until the tool has reached
maximum speed.
b. When taking a break from work, turn off the
tool, allow the paddles to stop, then remove
the paddles from the product. Place the tool
down on the rests.

OVERLOAD PROTECTION

NOTICE: In the event of overload or
overheating in non-stop operation, the power
tool will switch off automatically.
Fig. 9
To continue working, switch the power tool off
and back on again.
-12-