Radiatori 2000 PIANO II 600/3 Guide Rapide page 33

PLEASE NOTE: Wait until the device is actually connected to the network. Wait for the word for
connection to appear or for the Wi-Fi symbol to appear at the top right of the mobile phone
screen (this can take up to 1 minute to wait).
For Android systems: accept the connection to the network as indicated on the screen.
8. At this point, the app proposes the home networks to which you can associate. If the network
is not proposed, tap RETRY.
9. Select the desired home network.
10. Enter the password for the selected home network. PLEASE NOTE: Check the correctness of
the password with relative spaces, lowercase and uppercase.
(ATTENTION: if you enter an incorrect password, activate the RESET procedure: press the
thermostat connection button for 15 seconds).
11. Confirm the selected home network. Once confirmed, the app will redirect you to the Bluetooth
screen.
12. Return to the Wi-Fi screen.
13. Select ADD Wi-Fi - add one now [Fig. 16b];
14. Select ADD THERMOSTAT ALREADY CONNECTED TO THE HOME NETWORK [Fig. 16c];
15. At this point, scan the QR code supplied with the thermostat;
16. Rename the radiator with the desired name.
PAIRING TO AN ADDITIONAL THERMOSTAT TO THE APP VIA Wi-Fi:
1. Select the settings symbol at the top right;
2. Select ADD Wi-Fi;
3. Select ADD THERMOSTAT ALREADY CONNECTED TO THE HOME NETWORK;
4. Scan the QR code of the new radiator and rename it like the previous ones.
TROUBLESHOOTING
If the radiator has programming problems with Wi-Fi and does not turn on / off at set times as
per user programming (see the following paragraphs), we recommend:
A) To connect the thermostat first via Bluetooth and then via Wi-Fi.
We recommend carrying out this operation at least once at the first
connection so that the app synchronizes the date and time starting
from the date and time settings of the smartphone / tablet.
B) Retry Wi-Fi connection and programmable thermostat reprogram-
ming.
32
BT