Operation - Hultafors XL9 Mode D'emploi

6. Operation

Inserting the batteries
First you must remove the battery cover from underneath the laser. When the
battery cover has been removed, you have access to the battery housing. 4 C
batteries are used for the Multiline laser. Alkaline batteries are recommended
for optimum operating time.
Functions
The Multiline laser can be used by itself on the floor or on normal tripods.
• Switch on the laser by releasing the locking lever
(operates vertical beam)
• The display is green when the device is within the self-adjusting range. If
the display is red the device must be re-positioned on a more level surface.
The laser beam also flashes i f the device is not horizontal.
• The Multiline laser has three function switches
See figure 1
Horizontal mode
Press the H button once:
Press the H button twice:
Press the H button three times:
Vertical mode
Press the V button once:
Press the V button twice:
Press the V button three times:
Press the V button four times:
Plus mode
This button allows the Multiline laser to be used outdoors with the optional
detector.
GB
1 laser beam
4 laser beams (360°)
laser beams off
1 laser beam
2 laser beams
4 laser beams
laser beams off
19