Invicta OVATIO P614904 Notice D'utilisation Et D'installation page 16

OVATIO wood stove
Model: P614904
v.22/08/2018
Whichever method is used (normal output or long period), make sure the initial load of wood is properly lit and that the flame is
maintained. If necessary, set the regulator to the lighting position to increase airflow and allow the wood to catch.
Make sure there are flames during combustion of the volatile fraction of the wood, to avoid soot and emissions which could be
harmful to health or the environment.
Post combustion activated = GOOD Combustion without flames = BAD
Stove hot and clean Stove cold and dirty
Explanatory diagram
Not representative of this model
Dirty glass
Clean glass
Post-combustion air
Clean air
Embers
DT le 13/02/2020